FN21
![](https://www.omer.it/wp-content/uploads/images/new/fasteners/nail_FN21.png)
Equivalent to: ATRO FN
Gauge: 13
Wire dimension (mm): 1.90 x 2.15
T – Nails come in various shank diameters and head-widths. But problems can arise when too THIN and SMALL a “T” Nail is put in a nailer designed for heavier duty applications – or at the other end of the spectrum…trying to shoot a BIGGER T nail than a tool was made to accept - will either result in constant JAMS or just the nails are TOO Fat to Fit. Omer helps us find the “T” Nail sweet-spot. Keying in on a very useful 2.2mm shank diameter T Nail with a head that is 7mm wide…. gives the needed holding power and a head with enough WINGS to suit all but the most demanding applications. Starting with the little Wine Barrel/Cooperage – Beton model TN.715 nailer that is limited to a maximum 15mm length (5/8”). Then move up to Omer's TN.732 tools can accept “T” Nails up to 32mm maximum length (1-1/4”). Next for more Power and Size go to the TN.64… with a 64mm length (2-1/2”) nail at the top of its, (3d – 8d range in the penny system). At long last… we have truly Modern – reliable – “T” Nailers made with the Italian tradition of excellence in design and craftsman-like manufacturing skills.
Item | Length (mm) | Length (inch) | Finish | Gauge | Wire dimension (mm) | Point |
---|---|---|---|---|---|---|
FN 21 / 25 | 25 | 1" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 32 | 32 | 1-1/4" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 38 | 38 | 1-1/2" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 45 | 45 | 1-3/4" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 50 | 50 | 2" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 55 | 55 | 2-3/16" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 60 | 60 | 2-3/8" | galvanized | 13 | 1.90 x 2.15 | Chisel |
FN 21 / 63 | 63 | 2-1/2" | galvanized | 13 | 1.90 x 2.15 | Chisel |
Call 0438 455318